Handrails
A stair rail that flexes is posts and anchors, not a gate hinge.
Handrails details →Fence & Gate Welding in Layton, UT
Call or text (385) 220-0286 — A gate that won’t latch is usually a welding problem, not a new-fence problem. We fix fence and gate metal for Layton homes and small businesses—one repair at a time, not a full install crew.
- Residential and light commercial gate repair
- On-site work when the gate can’t be removed easily
- Reinforcement, not just cosmetic re-welding
Free quote request
Fence & Gate · Layton, UT
Getting the gate swinging and locking again
Bent frames, worn hinges, cracked corner welds, and busted pickets are the calls we get most. We straighten what’s straightenable and reinforce what isn’t, so the gate closes the way it’s supposed to.
When the fix needs to be bigger
Sometimes a hinge tab needs to be beefed up, not just re-welded. Sometimes a section needs to be rebuilt to match what’s already there. We’ll tell you which one you’re looking at before we start.
When it’s a repair, not a replacement
A lot of “replace the whole fence” quotes start out as one cracked hinge tab or a bent frame rail. If the failure is isolated, that’s our job. A few hundred feet of brand-new fence is a different company’s job.
Gate repairs are one part of Gate, Rail & Custom Fab Services in Layton, UT.
Photos that tell us if the gate stays put
Photos of the hinges, latch, and the cracked joint are enough to tell us if we can fix the gate on the posts. Call or text (385) 220-0286 · Text us.
FAQs
Can you fix my gate without taking it off the property?
Usually, yes. Send photos of the hinges, latch, and the damaged joint and we’ll confirm before we come out.
Gate work next to other property metal
Fabrication
A hinge tab that needs to be built heavier is a small fab job, not a new fence.
Fabrication details →Mobile Welding
Gates stay on the posts, so the rig comes to the driveway.
Mobile Welding details →Gate repairs on the Davis and Weber routes
Driveway gates and light commercial frames. Times are the usual Layton drive, not a same-day promise.
Clearfield, UT
Gate repairs in Clearfield are a 4.5-mile hop from Layton, close to 8 minutes.
Clearfield welding →Syracuse, UT
Gate repairs in Syracuse are a 5.5-mile hop from Layton, close to 10 minutes.
Syracuse welding →Kaysville, UT
Gate repairs in Kaysville are a 4.1-mile hop from Layton, close to 7 minutes.
Kaysville welding →Clinton, UT
Gate repairs in Clinton are a 7.9-mile hop from Layton, close to 13 minutes.
Clinton welding →Roy, UT
Gate repairs in Roy are a 8.3-mile hop from Layton, close to 12 minutes.
Roy welding →Ogden, UT
Gate repairs in Ogden are a 12.7-mile hop from Layton, close to 17 minutes.
Ogden welding →Gate won’t latch?
Call or text. Most of these repairs stay on the property — we’ll confirm from the photos before we roll.